Firstly:make sure the camera connect the router with the cable,and with the power on,the camera and your PC in the same LAN. finished connection,after the camera run by itself,pls check the lights that locate at the side of lan,if one is blinking, one is bright, it’s normal.
Secondly: turn off the firewall and antivirus program as well as adjust the security to low.then open the search ip tool, choose the advance mode,searching camera ip.normally you can find the camera ip.
Note: http port equal to camera port
Let’s do it step by step,please install the ip camera search tool,interface like this:
When you search the camera’s ip and port, you can open the inner access address via IE browser,
you can choose language,then log in this interface:
Click on the button at the end,then you will enter the background of the camera.
Find the Alarm time setting,then click.generally speaking the default setting like follows unless you need to modify the alarm time.
Then click the Motion Detection.choose the window 1,tick it will pop up the green area ,you can choose the size of the area.
We can set the Linkage Alarm in this interface,like E-mail Alarm, save the image to the Micro SD card,save the video to FTP and so on.
Take the FTP settings for example:
First,you need to log in the backgrond of the camera.find the option “Linkage Alarm” in the webpage interface.Then tick the “Save the image to the FTP and save the video to FTP server” option.
Shenzhen EasyN Technology Co., Ltd
Add: Block C4, 3rd Industry Zone, Huangmabu, Xixiang, Bao'an, Shenzhen 518126 CHINA